Core barrel of the reactor pressure vessel (RPV) for Rooppur NPP (Bangladesh) has been produced at the Volgodonsk branch of JSC “AEM-technology” (a part of machine building subdivision of ROSATOM – Atomenergomash)
RooppurNPP.jpg
Core barrel is one of the three main elements of the RPV internals. Core barrel vessel consists of six shells and elliptic bottom. The product height is about 11 meters; weight is 63 tons.
In the upper part of the core barrel, there are 238 holes with diameter of 196 mm and two holes with diameter 300mm. The holes are arranged in a specific order that represents six rows along the perimeter of the shell and intended for the coolant exit. There are 1344 holes with different diameters on the bottom of the product: 40mm and 60mm, and there are also 163 holes with diameter of 226mm. They are intended for supports installation and protect the fuel assemblies from being injected with small mechanical particles.  
The next important stage will be the installation of the grid and support elements. After the grid and support elements are installed, the test assembly of core barrel with the baffle and protective tube unit will be carried out. 
For reference:
Joint-Stock Company AEM-technology, founded in 2007 in the structure of JSC Atomenergomash, an engineering division of ROSATOM, is currently one of the leading Russian companies in the field of energy engineering, a member of the Russian Engineering Union. The structure of the company includes an engineering center, staffed by experienced designers and process-engineers, as well as two production sites: the branch of JSC AEM-technology Petrozavodskmash in Petrozavodsk and the branch of JSC AEM-technology Atommash in Volgodonsk.
Source: Media-centre of Atomenergomash